e k o e c a m e r a

1. • mount adaptation/conversion
     
   • light machining (respecting manuf. design)
     
   • vignette reduction
   • stepless, damped iris 
     
   • close focus extension
   • wide and tele conversion
     
   • cine set-up / off-set marks
     
   • iris modifications
   • focus helical modifications
     
   • coating removal
   • fixed lens extraction and mount conversion
   • lens support and mounting solutions
      
     
   

   This Carl Meyer 38mm f1.0 was serviced/adapted/adjusted to m4/3 and given close focus extension modification from approx. 3' minimum focus to 2' min.  An adapter ring was also fabricated and provided to accomodate client request for 1' min. focus.  Notice the lovely blued-steel iris on this rare, vintage lens. 

   • 1

     This Carl Meyer 38mm f1.0 was serviced/adapted/adjusted to m4/3 and given close focus extension modification from approx. 3' minimum focus to 2' min.  An adapter ring was also fabricated and provided to accomodate client request for 1' min. focus.  Notice the lovely blued-steel iris on this rare, vintage lens. 

2. 

   Light machining of barrel diameter is sometimes required in order to adapt properly.  ekoecamera lathe cuts can be seen here as bare brass.  Only the bare minimum of material has been removed, respecting the design and integrity of the original mount.  Lens is a Carl Zeiss Jena Tevidon 16mm f1.8. 

   • 1

     Light machining of barrel diameter is sometimes required in order to adapt properly.  ekoecamera lathe cuts can be seen here as bare brass.  Only the bare minimum of material has been removed, respecting the design and integrity of the original mount.  Lens is a Carl Zeiss Jena Tevidon 16mm f1.8. 

© edward koehler, 2010-2016